RTDAS - Device connectivity n Polling
Connectivity with devices and data polling
Problem: In the device tree, the device shows the RTDAS down signal Issue analysis: Reason -DATCon is off or it goes out of the network(LAN disconnect...
Wed, 16 Jun, 2021 at 2:45 PM
Issue: In PLSLog file, following error is found as: ‘Could not load the requested DLL. Device creation failed. Device information received is - .....
Fri, 25 Jun, 2021 at 2:43 PM
Issue: Error - A fatal error occurred - DAS cannot be started. Authentication failed. Please check Name and Password in PLSConfig.ini file. And showing b...
Fri, 25 Jun, 2021 at 2:44 PM
Problem Communication failure between RTDAS and Analyzer When the communication between RTDAS and analyzer fails then device status appears as below. ...
Thu, 9 Nov, 2023 at 7:36 PM
Issue: Unknown Exception occurred. Code - 803 - ModbusMaster : : ConnectToDevice ( ) - DeviceId : 2865 , Slave Device is not connected Slave Id : 1 ...
Fri, 25 Jun, 2021 at 2:45 PM
Problem: After starting RTDAS it gives a fatal error as shown in the below screenshot. Issue analysis: Reason -Another DAS for this site is a...
Fri, 25 Jun, 2021 at 12:25 PM
Problem: Device protocol configuration if data is available on Modbus RTU Solution: Do the below protocol configuration in protocol information for...
Fri, 25 Jun, 2021 at 3:10 PM
Problem: Variable showing the error value in current data Reason: 1. Start address of a variable is wrong. 2. Address mapped in variable configuratio...
Tue, 14 Mar, 2023 at 4:10 PM